![Switzerland - Helicopter Mountain Tour Across Snow Peaked Summits](https://www.sensorwell.at/wp-content/uploads/2019/05/istock-1009688334.jpg)
![](https://www.sensorwell.at/wp-content/uploads/2019/11/document-9b7b1105-c56a-8b5f-6d8cc5d8e2bc6c4e-1.jpg)
Sensorwell
MT-4RV2-A28
MICRO SWITCH MT Series Standard Basic Switch, Single Pole Double Throw Circuitry, 10 A at 125 Vdc/Vac (non-polarized), Roller Lever Actuator, 0,75 N [2.7 oz] Maximum Operating Force, Silver Contacts, Screw Termination, CSA, UL
MICRO SWITCH MT Series magnetic blow-out switches are designed to switch high-capacity (125 Vdc/250 Vdc) electrical loads. An integral magnet around the contact gap deflects the arc away from the contacts, extending switch life. Vents between the cover and housing allow the hot gas to escape.
![Team Of Engineers Holding Meeting In Factory](https://www.sensorwell.at/wp-content/uploads/2019/05/istock-1014151516.jpg)
MT-4RV2-A28
Produkt Merkmale
Kenndaten
- Mounting interchangeability with BZ/BA switches
- Rated for 10 A resistive at 125 Vac/Vdc and 3 A resistive at 250 Vdc
- Mechanical life of 100,000 cycles at 95% survival
- Arc-extinguishing design in contact area
- Arc-resistant case
Anwendungsbereiche
- DC motors
- Solenoids
Technische Daten
Switch Type
MICRO SWITCH Standard 25,4 mm H x 17,8 mm W x 50,8 mm L [1.0 in H x 0.7 in W x 2.0 in L]
Ampere Rating
10 A
Sealed
No
Circuitry
SPDT
Actuator
Roller Lever
Termination
Screw
Operating Temperature
-55 °C to 85 °C [-67 °F to 185 °F]
Voltage
125 Vac/125 Vdc
Actuator Length
48,22 mm [1.90 in]
Contact Type
Silver
Operating Force (OF)
0,75 N [2.7 oz] max.
Release Force
0,07 N [0.25 oz] min.
Pretravel (PT)
8,89 mm [0.35 in] max.
Overtravel (OT)
0,8 mm [0.032 in] min.
Differential Travel (DT)
1,65 mm [0.064 in] max.
Operating Position (OP)
30,17 mm ±0,38 mm [1.188 in ±0.015 in]
Housing Material
Arc Resistant Melamine
Agency Approvals and Standards
UL, CSA
Mounting Screw Size
3,53 mm [0.139 in]
Mounting Centers
25,4 mm [1 in]
Tightening Torque
0,33 N m [3.0 in lb]
Weight
34,5 g [0.076 lb]
Package Height
24,1 mm [0.95 in]
Package Width
17,5 mm [0.69 in]
Package Length
49,3 mm [1.94 in]
Recommended For
For best results, either polarize the switch with common terminal being of negative polarity or mount the switch with brass screws and space at least 0.250 in from magnetic materials.
Comment
Sintered stainless steel roller
Availability
Global
Series Name
MT