Sensorwell
060-6827-01
Model UBP-10 Universal Bipolar Inline Amplifier with 0 Vdc to 10 Vdc Output and 24 Vdc to 32 Vdc Single Voltage Supply Input
The Model UBP bi-polar amplifier supplies a highly regulated bridge excitation voltage for the transducer and converts the millivolt signal of the transducer to a ±5 Vdc signal. The Universal In-line features two selectable excitation voltages, programmable gain settings, a wide adjustment range on the zero, and a buffered solid-state shunt cal relay for quick calibration.
060-6827-01
Produkt Merkmale
Kenndaten
- For replacement only, not to be used in new design
- Strain gage sensor amplifier
- ±5 Vdc output
- ±15 Vdc supply voltage
- NEMA 4 housing
- Selectable excitation voltages: 3 V, 5 V, or 10 V @ 70 mA
- Increases signal-to-noise ratio in noisy environments
- Effects of voltage drops in excitation sources are eliminated
- Signals may be sent to the data systems from low impedence sources
Technische Daten
Order Code
BE123EL,51J
Number of Channels
1
Case Material
Plastic or Painted Aluminum
Mounting
#6 or #8 screws
Input Type
±15 Vdc input
Sealing
IP66/NEMA4
Temperature (Operating)
-15 °C to 71 °C [5 °F to 160 °F]
Transducer Type
Bridge-based sensor
Transducer Excitation
3 Vdc, 5 Vdc, or 10 Vdc @ 70 mA
Supply Voltage
±15 Vdc
Current Draw
70 mA
Zero Adjustment Range - Coarse
±50 %
Zero Adjustment Range - Fine
±15 %
Span Adjustment Range
0.5 mV/V to 10 mV/V. ±25 % fine
Linearity
0.01 % of full scale
Output
±5 Vdc
Signal-to-Noise Ratio
65 dB
dc Power Supply Rejection Ratio
>110 dB
Shunt Calibration
Solid state relay on board
Signal Output
±5 Vdc
Output Current
1 mA max.
Product Dimensions
Plastic: 63,5 mm H x 96,25 mm L x 53,34 mm D [2.5 in H x 3.75 in L x 2.1 in D]; Aluminum: 76,2 mm H x 127 mm W x 63,5 mm D [3.0 in H x 5.0 in W x 2.5 in D]
UNSPSC Code
32101514
UNSPSC Commodity
Amplifiers
Availability
Global
Series Name
UBP-10
