Sensorwell
060-6827-02
Model UV Universal Inline Amplifier with ±5 Vdc Output and 11 Vdc to 28 Vdc Input
The Model UV amplifier supplies a highly regulated bridge excitation voltage for the transducer and converts the millivolt signal of the transducer to a ±10 Vdc signal. The Universal In-line features two selectable exciation voltages, programmable gain settings, a wide adjustment range on the zero, and a buffered solid-state shunt cal relay for quick calibration.
060-6827-02
Produkt Merkmale
Kenndaten
- Strain gage sensor amplifier
- ±5 Vdc three-wire output
- 3 V or 5 V excitation voltages @ 70 mA
- 11 Vdc to 28 Vdc supply voltage
- NEMA 4 housing
- Increases signal-to-noise ratio in noisy environments
- Effects of voltage drops in excitation sources are eliminated
- Signals may be sent to the data systems from low impedence sources
Technische Daten
Order Code
BE124EL,51J
Number of Channels
1
Case Material
Plastic or Painted Aluminum
Mounting
#6 or #8 screws
Sealing
IP66 or NEMA 4
Temperature (Operating)
-15 °C to 71 °C [5 °F to 160 °F]
Transducer Type
Bridge-based sensor
Transducer Excitation
3 Vdc or 5 Vdc @ 70 mA
Supply Voltage
11 Vdc to 28 Vdc
Current Draw
50 mA
Zero Adjustment Range - Coarse
±50 %
Zero Adjustment Range - Fine
±15 %
Span Adjustment Range
0.75 mV/V to 13.3 mV/V, ±25 % fine adjustment
Linearity
0.02 % of full scale
Output
±5 Vdc
Frequency Response (-3 dB)
dc: 7000 Hz with 350 ohm bridge; dc: 5000 Hz with 5000 ohm bridge
Rise Time (0 % to 90 %)
54 ms with 350 ohm bridge; 78 ms with 5000 ohm bridge
Signal-to-Noise Ratio
65 dB
dc Power Supply Rejection Ratio
>110 dB
Shunt Calibration
Solid statate relay on board
Output Current
2 mA max.
Product Dimensions
Plastic: 63,5 mm H x 96,25 mm L x 53,34 mm D [2.5 in H x 3.75 in L x 2.1 in D]; Aluminum: 76,2 mm H x 127 mm W x 63,5 mm D [3.0 in H x 5.0 in W x 2.5 in D]
UNSPSC Code
32101514
UNSPSC Commodity
Amplifiers
Availability
Global
Series Name
UV
