Sensorwell
2450CM 81000461
2450CM Series Ceramic Manual Reset Thermostats
The 2450CM Series consists of a temperature-sensitive bimetal disc, electrically isolated from the switch, which actuates the normally closed contacts. The contacts open when the surface or ambient temperatures increase to the operating snap point of the calibrated disc. The circuit will stay open above room ambient temperature until the manual reset button is pressed. Response to temperature changes is extremely rapid due to the inherently low mass of the disc and the small size of the product.
2450CM 81000461
Produkt Merkmale
Kenndaten
- Cost effective
- Rivet sleeve construction
- Manually resetable
- High temperature capability
Anwendungsbereiche
- HVAC
- Appliances
- Hot water heaters
- Office automation
Technische Daten
Functional Properties
Open on rise
Reset Type
Manual
Operating Temperature
52 °C to 232 °C [125 °F to 450 °F]
Amperage
15 A/10 A
Voltage
120 Vac/250 Vac
Open Temperature
200.0 °C [392 °F]
Open Tolerance
7.2 °C [13 °F]
Close Temperature
Manual
Close Tolerance
N/A
Environmental Exposure Range
10 °C to 260 °C [50 °F to 500 °F]
Dielectric Strength
MIL-STD-202, Method 301; 2000 Vac 60 Hz - Terminal to Case
Insulation Resistance
MIL-STD-202, Method 302; Cond. B - 500 MOhm - 500 Vdc applied
Contact Resistance
MIL-STD-202, Method 307; 0.050 Ohm
Housing Material
Ceramic
Contact Material
Silver/nickel alloy
Mounting
B203 moveable bracket
Agency Approvals and Standards
UL, CSA, VDE
Comments
N/A
Series Name
2450CM
