Sensorwell

ZS-00313-12

ZS Series, One Piece Sensor, Harsh Environment 3-wire dc, Cylindrical, Stainless steel, Ceramic, NO Current Source, 12 Vdc to 32 Vdc
Environment-proof, self-contained proximity sensor enclosed in a rugged stainless steel housing, designed to meet the requirements of aerospace, ordnance, marine, mass transit and high performance industrial equipment.
Operation by the Eddy Current Killed Oscillator (ECKO) principle, which is used to detect metal objects passing in front of the sensing face. Once a target metal is detected, a trigger signal is produced which is then passed through
the output conditioning circuitry to give a high or low output, depending on the sensor application.

Jetzt anfragen!

ZS-00313-12

Produkt Merkmale

Kenndaten

  • All Metal Sensing
  • Small housing
  • High level of electronics protection
  • Leadwire or connector termination

Anwendungsbereiche

  • Aircraft landing gear
  • Gun turret position control
  • Door and hatch open/closed monitoring

Technische Daten

Series Name
ZS
Sensor Type
Harsh environment
Technology
ECKO
Supply Current
25 mA
Supply Voltage
12 Vdc to 32 Vdc
Load Current
200 mA
Output Type
Normally open, current sourcing
Operating Temperature
-40°C to 100°C [-40°F to 212°F]
Shape
Cylindrical
Packaging
One piece sensor
Dimension
M12
Housing Material
Stainless steel
Sensing Face
Ceramic
Termination
Leadwire
Cable Length
500 mm [19.7 in]
Guaranteed Actuation Distance
3 mm to 3,99 mm [0.118 in to 0.157 in]
Operating Frequency
2000 Hz
Gd (mm)
6,6
Shock
30 g 10 ms
BITE
No
Reverse Polarity
Yes
Short Circuit
Yes
Pressure Proof
No
Insulation Resistance
50 MOhm at 500 Vdc
Mean Time Between Failure
1435000
Conducted Suscept
MIL-STD-461B
LEMP
DEF 07-55, T2, S5
RF Suspect
MIL-STD-461B
RF Emission
MIL-STD-461B
Conducted Emission
MIL-STD-461B
Comments
DEF STAN 07-55 Pt2, Section 1/1 Paragraph 4a(1), 4b(1)
Weight
65 g [2.3 oz]
UNSPSC Commodity
41111926 Proximity sensors
UNSPSC Code
41111926

Wir sind gerne für Sie da!

Jetzt kontaktieren

Unsere Partner

Kalsdorfer Straße 26 a
8073 Feldkirchen bei Graz
Österreich

Tel:    +43 316 40 33 01
Mail:  office@sensorwell.at